{"id":3099,"date":"2026-05-15T18:25:40","date_gmt":"2026-05-15T10:25:40","guid":{"rendered":"http:\/\/manufacturing.wiki\/?p=3099"},"modified":"2026-05-15T18:25:41","modified_gmt":"2026-05-15T10:25:41","slug":"texas-instruments-txb0604-auto-bidirectional-level-translator","status":"publish","type":"post","link":"http:\/\/manufacturing.wiki\/index.php\/2026\/05\/15\/texas-instruments-txb0604-auto-bidirectional-level-translator\/","title":{"rendered":"Texas Instruments TXB0604 Auto-Bidirectional Level Translator"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Texas Instruments TXB0604 Auto-Bidirectional Level Translator is a 4-bit non-inverting auto-bidirectional translator that uses two separate configurable power-supply rails. This voltage translator\/line redriver can address voltage-domain mismatches and boost signals in long-cabling transmission applications.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The TXB0604 leverages a patented design to achieve high data throughput for memory-intensive interfaces, such as Quad-SPI, between BMC and Flash devices, without signal integrity losses caused by excessive output parasitic capacitance. The A port is designed to track VCCA and accepts a supply voltage of 0.9V to 2V. The B port is designed to track VCCB and accepts a supply voltage of 1.65V to 3.6V.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When the OE input is low, all outputs are placed in the high-impedance state. To ensure a high-impedance state during power-down or power-up, OE must be tied to GND via a pulldown resistor. The driver&#8217;s current-sourcing capability determines the minimum value of the resistor. The Texas Instruments TXB0604 is designed so that the OE input circuit is supplied by VCCA.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Features<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">1. 0.9V to 2V on A port and 1.65V to 3.6V on B port<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">2. Supports high-speed interfaces such as QSPI, OSPI, eSPI<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">3. No direction control signal needed<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">4. The VCC isolation feature is that if either VCC input is at GND, all outputs are in the high-impedance state<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">5. Schmitt-trigger inputs allow for slow or noisy inputs<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">6. Output enable (OE) input circuit referenced to VCCA<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">7. IOFF supports partial power-down mode operation<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">8. Latch-up performance exceeds 100mA per JESD 78, Class II<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>ADI Authorized Distributor , Components Authorized Distributor, TOP1 China PCBA manufacture, TI Authorized Distributor, MACOM Authorized Distributor , XILINX Authorized Distributor, ALTERA Authorized Distributor, HKin.com, HKinventory.com ,Murata\u00a0 Authorized Distributor, AVX\u00a0 Authorized Distributor,FPV flight control unit.Official website address:<a href=\"https:\/\/www.addcomponents.hk\/\">https:\/\/www.addcomponents.hk\/<\/a><\/strong><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Texas Instruments TXB0604 Auto-Bidirectional Level Tran &hellip;<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-3099","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"_links":{"self":[{"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/posts\/3099","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/comments?post=3099"}],"version-history":[{"count":1,"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/posts\/3099\/revisions"}],"predecessor-version":[{"id":3100,"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/posts\/3099\/revisions\/3100"}],"wp:attachment":[{"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/media?parent=3099"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/categories?post=3099"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/manufacturing.wiki\/index.php\/wp-json\/wp\/v2\/tags?post=3099"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}